RC Hammers
Our DTH hammer and bits are compatible with CIR, DHD, QL,SD,Mission, etc. series of Atlas and Sandvik etc. They are with high efficiency, low failure rate and long service life. Even for all kinds of high hardness, high abrasive rocks and other harsh conditions, our drilling tools can also realize efficient and economical drilling.
◆Type and Technical Specification of Reverse Circulation DTH Hammers
| Item | GLF 335 |
GLF 345 |
GLF 355 |
GLF 365 |
GLF 385 |
GLF 3105 |
GLF 3125 |
| Drilling Dia.(ф/mm) | 90-105 | 110-130 | 135-155 | 160-200 | 200-254 | 254-311 | 311-360 |
| Hammer Length(mm) | 143 | 1281 | 1292 | 1345 | 1578 | 1440 | 1430 |
| Outside Dia.(ф/mm) | 85 | 105 | 124 | 154 | 190 | 250 | 270 |
| Center Hole Dia. (ф/mm) | 33 | 36 | 36 | 61 | 61 | 75 | 85 |
| Working Pressure(Mpa) | 0.7-2.1 | 0.7-2.1 | 0.8-2.1 | 0.8-2.1 | 0.8-2.1 | 0.8-2.4 | 0.8-2.4 |
| Air Consumption (M3/Min.) | 4.2-11.7 | 5.7-14.2 | 6.5-19.3 | 9-18 | 12-30.8 | 15-34 | 20-37.8 |
| Torque(N.M) | 475 | 600 | 791 | 950 | 1040 | 1260 | 1250 |
| Impact Frequency (Times/Min.) | ≥800 | ≥800 | 800-1200 | 600-1100 | 660-1208 | 660-1230 | 600-1150 |
| Connection 1 | API 2-3/8” | API 2-7/8” | T 91-3 | API 4-1/2” | API 4-1/2” | API 4-1/2” | API 4-1/2” |
